It is a popular misconception that the slots or drillings in a disc determine the direction of rotation. In truth, for an internally vented disc, the geometry of the vanes dictates the direction of rotation. There are three vane types in use:

  • Straight
  • Pillar vane (comprised of many small posts)
  • Curved vane

 

The first two vane types are non-directional, and can be used on either side of the vehicle. The curved vane disc, however, is directional. A curved vane disc must be installed with the vanes running back from the inside to outside diameters in the direction of rotation. Orienting the disc in this manner creates a centrifugal pump. The rotation of the disc causes air to be pumped from the center of the disc, through the vanes, and out through the outside diameter of the disc. This greatly enhances the disc's ability to dissipate heat.

Additionally, all of Brembo's slotted discs are directional as well, regardless of the vane geometry. The discs should be installed such that the end of the slot nearest the outer edge of the disc contacts the pad first.



Related news

Grupo desportivo fabrik modalidades de pago
Hme wireless frequency scanner
Plaquette association humanitaires
Como hacer cachitos de jamon y queso bocadillo
Atleta brasileiro que foi pego no doping
Prix du cirque de zavatta warren
Kbmusique idir mp3
Cours du soir math physique chimie college